110 VDC 50 Amp
110 VDC 50 Amp Neutral Relay with Limit Switch
| |
|
|
12 Volt 100 amp White Rogers Relay
12 Volt 100 amp White Rogers Relay
| |
|
|
200 amp white Rogers Reley
12 Volt and 48 Volt 200 amp white Rogers Reley
| |
|
|
AC Voltage Transducer
The AC-VSEN includes 3 voltage transformers for up to 3 voltage inputs
| $104.97 |
|
|
Alternate Action Relay
The Model 091-98-12 Alternate Action Relay is designed to remotely turn a load ON and OFF by grounding an input to the relay.
| $91.30 |
|
|
Auto Current A DC Current Sensor
The Auto Current A is an Auto Current with auxiliary input, which when grounded causes the output relay to operate.
| |
|
|
Auto Current DC Current Sensor
The Auto Current detects current flow and closes a relay providing a remote indication.
| |
|
|
Auto Current F
The Auto Current F detects current and closes a switch when the sensed current flows to provide a remote
indication
| |
|
|
Auto Current F-A
The Auto Current F-A is an Auto Current F with an auxiliary input, which when grounded causes the output relay to operate.
| |
|
|
Auto Interlock II
The Auto Interlock II is a power transfer relay which automatically transfers the 120 volt A.C. from the shoreline to the auxiliary generator when the generator is started.
| |
|
|
Auto Interlock III
The Auto Interlock III is a power transfer relay which automatically transfers the 120 volt A.C. from the shoreline to the auxiliary generator when the generator is started.
| $283.40 |
|
|
Auto Interlock IV
The Auto Interlock IV is a 4 pole, 50 ampere power transfer relay which automatically transfers the 120 volt A.C.
| $537.60 |
|
|
Auto Trol
The Auto-Trol low frequency cutout relay is intended to protect A.C. loads by disconnecting them from the power source when the frequency of that power source drops below 60 Hz.
| $222.70 |
|
|
DPDT 30A Relays
These double-pole, double-throw relays can be used for up to 30 amps at 12 or 24 volts DC or 250 volts AC.
| |
|
|
Dual USB Charging Port
The 091-219 Dual USB Charging Port is designed to fit into a standard 1.45" x 0.83" panel cutout.
| |
|
|
Dynamic Disconnect
The Dynamic Disconnect is a coupling device wired between an Auto Eject and the vehicle and serves to only connect the A.C. power after the plug has been inserted into the Auto Eject.
| $65.00 |
|
|
Load Manager
The LOAD MANAGER is a precision solid state controller which sequentially switches ON seven relays at 1/2 second intervals. Individual switches, which the user may install, can select a combination of outputs.
| $369.00 |
|
|
Load Manager 1901
The Load Manager 1901 is designed to meet and exceed all the requirements of NFPA 1901.
| $437.50 |
|
|
Load Manager 1H
The LOAD MANAGER 1H is a small economical assembly that monitors a D.C. voltage and operates a relay when the voltage drops below its set point.
| $100.30 |
|
|
Load Manager 1HP
Load Manager 1HP, is a compact, encapsulated load manager, that monitors the battery voltage, and operates a 75 ampere relay to de-energize a load when the voltage drops.
| $165.60 |
|
|
Load Manager 2
The LOAD MANAGER 2 is a simple, compact assembly for installation in applications that require the shedding of only 2 loads.
| $163.20 |
|
|
Load Manager Mark II
The “LOAD MANAGER MARK II” is a precision solid-state controller, which sequentially switches 8 self-contained relays at 1/2 second intervals.
| $583.60 |
|
|
Load Manager P
The Load Manager P is a precision low voltage disconnect designed to shut down a radio or computer to prevent complete discharge of a vehicle's battery.
| $145.30 |
|
|
Logic Module
The Logic Module implements the logic "OR" or "AND" function in a variety of alarm or control applications.
| $96.90 |
|
|
Over Voltage Relay
The 091-108 Over Voltage Relay is a device that continuously monitors the voltage of the battery.
| $102.50 |
|
|
Power Save Timer
Power Save Timer limits the duty cycle of an A.C. load to 1 hour "ON" and 1 hour "OFF".
| $214.50 |
|
|
Programmable UV & OV Relay
The UV-OV Relay Precise - Programmable Voltage Detector monitors the battery system voltage and detects both over voltage and under voltage conditions.
| $182.40 |
|
|
Relay Board 2
Two relays are mounted and are energized individually from power supplied through the terminal strip.
| $60.90 |
|
|
Relay Board 4
Four relays are mounted and are energized individually from power supplied through the terminal strip.
| $86.80 |
|
|
Soft Start
The “Soft Start” is a precision, solid-state controller, which sequentially switches “ON” seven loads at l/2 second intervals.
| $191.90 |
|
|
Time Delay Relay, DODO
The Model 091-103-012 Time Delay Relay is designed to keep a load energized for some time interval after the load is de-energized.
| $104.80 |
|
|
Time Delay Relay, DOPI
The Model 091-100-12 Time Delay Relay is designed to delay the operation of a device for a definite time interval after energizing some other equipment.
| $104.80 |
|
|
UV OV Relay
The UV-OV Relay Precise - Programmable Voltage Detector monitors battery voltage and detects both over voltage and under voltage conditions.
| $182.40 |
|