The LOAD MANAGER 2 is a
simple, compact assembly for installation in applications that require
the shedding of only 2 loads. The D.C. input is monitored and when this
voltage drops below the set point, one relay is operated. When the
voltage drops an additional .5 volts, the second relay is energized.
The relays have both normally open and normally closed contacts
available for complete flexibility in wiring. Easily installed, the
LOAD MANAGER 2 may be adjusted in the field for a range of set points
varying from 10.5 to 13 volts D.C.
A Simple Load Manager for 2 Loads
Volt System and Detects Low Voltage
Relay Output, 30 Amp Contacts
Automatic Reset when Voltage Rises
Specifications: Input nominal:
12 volts D.C.
Set point: 11.5 +/-.05 volts D.C.
Adj. range: 10.5 to 13 volts D.C.
normally closed, 30 amp, normally open, 30 amp.