Mastervolt CombiMaster 2000 (120 V) Cat. No. MV-2000

CombiMaster 12/2000-100 (120 V) Designed with the customer in mind and using the latest technology, the CombiMaster range is all about user-friendliness and reliability. But don’t let that friendly appearance misguide you: the powerful CombiMaster range drives even the heaviest and most sensitive loads with ease! With the CombiMaster, power dips and failures belong to the past. The automatic AC transfer system switches between generator or mains and inverter output, ensuring a constant power supply. Its Power Assist function prevents tripping of the mains fuse in case you’re connected to a weak land line or small generator. The CombiMaster range delivers unmatched performance and value for money. As you would expect from Mastervolt, the CombiMaster is completed with MasterBus, CZone and NMEA 2000 compatible communication, allowing for a broad range of monitoring and system integration options. Features Most compact and lightweight Combi in its class. Reliable, hum-free and longer operation from your batteries. Starts even the heaviest and most sensitive loads. Intelligent 3-step+ battery charger for faster and safer charging. Automatic switching between mains and inverter mode. Power Assist prevents blown mains fuses. Generator compatible. Integrated CZone, MasterBus and NMEA 2000 communication. Quick installation with heavy duty connections. E-mark certified. Remote Control and Monitoring options MasterBus compatible via SmartRemote or EasyView 5 display. CZone / NMEA 2000 compatible via Touch 5 or Touch 10 display. NMEA 2000 compatible via 3rd party multifunctional display. Specifications Specifications sine wave inverter Nominal DC voltage 12 V (10.2–16 V) Output voltage 120 V Output frequency 60/50 Hz (configurable) Output waveform true sine Continuous power at 40 °C / 104 °F, cos phi 1 2000 W Peak power (30 sec) 3000 W Surge power (5 sec) 4000 W Max. efficiency 93 % Battery no-load power consumption 25 W (on mode) / < 1 mA (off mode) Energy saving mode consumption 10 W Synchronise with mains yes Specifications battery charger Input voltage range  90-140 V Max. input current 17 A (adjustable) Max. charge current at 40 °C / 104 °F 100 A at 14.25 V (configurable) Battery temperature sensor yes, included Battery voltage sense automatic compensation Specifications transfer system AC input 30 A (switched) AC output 47 A AC input fuse yes Transfer speed 10 ms Transfer voltage range wide 70–140 V / narrow 90–140V Transfer frequency range 40-65 Hz General specifications Display/read-out LED display Dimensions, hxwxd 448 x 284 x 155 mm 17.6 x 11.2 x 6.1 inch Weight 9.3 kg 20.5 lb Approvals ABYC A31, UL1236, UL1741, SAEJ1171 Technical specifications Charge characteristic UoUo, automatic / 3-step+ for flooded, Gel/AGM and MLI, configurable Recommended battery capacity 180-500 Ah (based on gel batteries, may differ for other types) Ground relay yes, configurable by means of mechanical jumper Temperature range (ambient temp.) -25 °C to 60 °C, derating > 40 °C -13 °F to 140 °F Cooling vario fan Protection degree IP23 (vertical mounting) Safety class IEC protection class I Humidity protection conformal coating, max. 95 % relative humidity, non condensing Protections over-temperature, overload, short circuit, high/low battery voltage Power Assist yes, supports AC input with power from the battery Power Sharing yes, allows you to select AC Input fuse setting MasterBus compatible yes CZone / NMEA 2000 compatible yes Voltage: 12V/2000-100A (120V), 35512000 : $1,628.49 24V/2000-60A (120), 35522000 : $2,086.56