Battery Saver LR HO w/ USB Cat. No. 091-195-12-USB

$558.20

The Battery Saver Low Ripple (BSLR) is a power supply with a load power transfer function. Loads connected to the BSLR are powered by the vehicle's battery when the AC power to the BSLR is OFF. When AC power is applied to the BSLR special circuitry within the Battery Saver transfers the load(s) to the Battery Saver output. The Battery Saver output then provides low ripple 12VDC System power to Battery Saver load(s). Installation of a Battery Saver eliminates the power drain on a vehicle battery and or a battery under-charge ensuring all vehicle battery charger power is available to charge the battery. This Battery Saver is unique in that there is no interruption of power supplied to the loads during power transfers. The feature makes the BSLR ideal for Mobile Data Terminal (MDT) and or 12VDC vehicle computer systems that may "re-boot" during an input power interruption. In addition to the Battery Saver output the BSLR with USB allows for USB interface. The USB interface is conveniently located on the front panel and can be used to recharge electronic devices. 20A, total output Relay removes auxiliary loads from vehicle battery and connects to battery saver, preventing battery discharge when in station Front panel USB interface used for recharging electronic devices such as the IPhone or IPad Clean, low ripple output causes no interference with sensitive electronics Fast acting relay ensures "glitch" free power transfer Current limiting prevents overload Front panel "Power On" indicator Designed for rigors of emergency vehicle use; heavy duty case and components 3 year warranty Input: 120 Vac, 50/60 Hz, 4.5 Amps Max RMS, 12 Vdc from Battery Input Fuse: (2) 6.3 Amp Fast Acting Output: 12 Vdc, 20 Amps USB: 5.0 Volts, 1 Amp Output Ripple: 30 Millivolts, AC, RMS Output Fuse (Recommended): 25 Amps, Fast Acting Electronic Current Limit: 20 Amps Indicator: Power "ON," LED Weight: 5 lbs Warranty: 3 Years Datasheet.pdf (765 Kb) Instruction Manual.pdf (201 Kb) Product Specifications.doc (960 Kb)