Magnum Energy Microinverter
The ME-GT500 micro-inverter connects to two common 60-cell or 72-cell
modules each and converts the output to 120/240 VAC current for grid
tie use. The inverter has the AC cabling built in so there is no
separate trunk cable to buy or install. There are two sets of MC4 type
connectors for the two solar modules. The output from each module is up
to 250 Watts, so up to 310 Watt modules can be used with minimal
limiting of the expected power. Each solar module input feeds a
separate MPPT channel for optimum power production. Peak efficiency is
95.5% (Unofficial CEC rating is 95%). Rated at NEMA 6 and for -40F to
149F (-40C to 65C) temperatures. The GT500 is listed to UL1741, CSA
C22.2 No.107.1-01. These meet all rapid shutdown requirements with the
loss of AC power to the circuits. Limited 25 year warranty.
Up to 7 GT500 inverters can be connected per string to form an AC
circuit with 20A circuit breaker. Multiple AC circuits can be
paralleled for more power. The ME-MGT-AC-F AC termination cable is used
at one end of each string of inverters to connect to the output in a
transition box. The ME-MGT-ENDCAP-F is used to cap the unused connector
of the last inverter in a string. The ME-MGT-AC-EXT is a 6 foot long
jumper cable with connectors on each end to allow greater spacing
between two inverters.
The ME-MGT-MW MagwebGT is the gateway and communication unit for the
Micro GT inverters. It plugs into a 120 VAC outlet near the system and
reads the data from the inverters. One connection from the MagwebGT is
made to the owners router via an Ethernet cable supplied. Indoor NEMA
1, listed to IEC 60950-1, EN60950-1, IEC 60529, ANSI/UL 60950-1,
CAN/CSA C22.2 No.60950-1
These micro-inverters have been optimized to communicate with the
Magnum MS-PAE off grid inverters to form a functional AC coupled grid
tied system with battery backup. The ME-MGT-ADAPTER allows
communication between the MagwebGT and a Magnum MS-PAE series battery
inverter. Frequency shift in the MS-PAE inverter will cause the GT
micro-inverters to reduce power output to prevent battery overcharge
during a power outage. An AC coupled system is limited to eight GT500
inverters per MS-4448-PAE inverter.
Length | 12.0 | Width | 9.0 | Height | 4.0 | Weight | 8.0 | Manufacturer Part Number | ME-MGT500 | Minimum MPPT Range | 22 |
|