INSTALLATION INSTRUCTIONS
The Model 091-64-XX indicator is a suppressed zero voltmeter which provides an indication
of system voltage. Available for 12 or 24 volt systems.
To Mount the 091-64-XX:
1. Cut a 2 inch diameter hole in panel of vehicle.
2. Remove the mounting bracket from the meter.
3. Install meter in panel.
4. Slip mounting bracket over studs of the back of the meter.
5. Fasten meter by installing 2 hex nuts to hold mounting bracket in place.
6. Install wires (see wiring diagram).
Model #
091-64-12 This economical indicator is a
suppressed zero voltmeter wich provides an indication of system
voltage. Available for 12 volt systems only.
Model
# 091-64-24 This economical indicator is a
suppressed zero voltmeter wich provides an indication of system
voltage. Available for 24 volt systems only.
|