The The Auto Charge 20 is a fully automatic
battery charger for vehicles with three independent batteries which must
be charged. The charger contains 3 separate and independent circuits, 1 for
each battery. Each battery is independently sensed and charged as required.
Even though the total for all three outputs is limited to 20 amperes any
one of the batteries may receive up to 20 amperes if the other batteries
do not require a charge. Rugged construction permits vehicle mounting or
the charger may be wall mounted. Optional indicators are available to remotely
display when the batteries are charged.
- Automatically charges three battery banks utilizing
independent sense circuits that control voltage and current to each battery,
thus parasitic loads on one battery have no effect on the others
- A patented built-in sense circuit checks battery voltage 120 times
per second to compensate for voltage drop in charging wires providing quick
re-charge, with no overcharge
- Full amperage output is available to any battery if the adjacent banks
do not require charging, optimizing use of available power in charging banks
with differing parasitic load rates
- Designed for rigors of emergency vehicle use; heavy duty aluminum case
with protective front panel plate and wire strain relief
Specifications: Input: 120 VAC
50/60 Hz, 4.7 Amp
Output Volts: for 12V batteries
Output Current: 0-20 amps output
current determined by state of charge of batteries
Weight: 22 lbs
Warranty: 3 Years
Model#
|
Output
Voltage |
Output Amps |
Input Voltage |
Option |
Optional Indicator |
091-10-12 |
12 |
20 |
120 V.A.C. |
none |
YES |
091-10-24 |
24 |
10 |
120 V.A.C. |
none |
YES |
091-10-DV-12 |
12 |
20 |
120V OR 230V |
DV |
YES |
091-10PIM |
12 |
20 |
120 V.A.C. |
PIM |
NO |
|