Xantrex Freedom HF Inverter/Chargers Cat. No. X-FHF

Freedom HF Inverter/Chargers Compact inverter/chargers to power the comforts of home on your boat, RV or truck. With modified sine wave output, Freedom HF 1000 and 1800 Inverter/Chargers are designed to run entertainment systems and small appliances in smaller boats, RV’s, and trucks. The Freedom HF Inverter/Chargers are the smallest, lightest, and least expensive models in the Xantrex lineup. Product Info The Freedom HF is available in two sizes: 1000 watts with a 20-amp charger and 1800 watts with a 40-amp charger. Both Freedom HF models are designed for demanding marine and RV conditions. Temperature-controlled multistage charging ensures that your batteries are recharged safely and efficiently. Both models include an automatic transfer switch and a detachable digital remote control panel display that provides precise system information and can be mounted wherever you require the information. Product Features Designed to power demanding loads such as microwave ovens, TVs, DVD players, small appliances and other electronic equipment Removable digital display to provide system status Automatic three-stage battery charger Designed to be hardwired using a terminal strip, or by connecting AC through GFCI receptacles (included) Built-in 30-amp relay to automatically transfer between inverter power and incoming AC utility power Protection Features Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Ground-fault protection ETL listed for use in mobile RV and marine applications Specifications Electrical Specifications - Inverter     Models HF 1000 HF 1800 Output power (continuous) 1000 W 1800 W Surge power  2000 W 3600 W Output frequency regulation  60 Hz 60 Hz Inverter voltage regulation  115 +/-10 Vrms 115 +/-10 Vrms Output wave form  Modified sine wave Modified sine wave Efficiency (full load)  > 82% > 82% Peak efficiency  > 87% > 87% No-load current draw (idle mode)  < 1 Adc < 1 Adc Off mode current draw (display off) < 5 mA < 5 mA Electrical Specifications - Charger     Charge rate  20 A 40 A  AC input voltage range  95 – 130 Vac   AC transfer relay  30 A 30 A Battery voltage (nominal)  12 Vdc 12 Vdc Battery voltage range  10.5 – 15.5 Vdc 10.5 – 15.5 Vdc Low battery cut-out  10.5 Vdc 10.5 Vdc AC input (max. charge) 5 Aac 9 Aac Default bulk charge voltage setting  14.2 Vdc 14.2 Vdc Default float charge voltage setting  13.5 Vdc 13.5 Vdc Equalize charge voltage (wet cell only) N/A N/A Battery charge outputs One One Charge control  Three-stage Three-stage Battery type settings  Flooded / Gel / AGM / Fixed 13.5 Vdc Equalization  No No Internal temperature-sensitive charging  Yes Yes General Specifications     Optimal operating temperature range  32°F to 104°F (0°C to 40°C)   Optional remotes  Detachable display Detachable display Unit weight 10 lb (4.5 kg) 12.8 lb (5.8 kg) Unit dimensions (H x W x L) 4.2 x 9.5 x 15.5“  4.2 x 9.5 x 18.0“    (106 x 241 x 393 mm) (106 x 241 x 457 mm) Warranty  One year One year Part number 806-1020 806-1840 Regulatory & Environmental Compliance Certified to CSA Standard C22.2 No. 107.1 and UL458 Model: HF 1000 , 806-1055 : $1,139.49 HF-1800, 806-1840 : $1,227.29 HFS-1000, 807-1055 : $1,119.39 HF 1000 , 806-1020 : $988.19