Lectra Shield Cat. No. LS-E

SURGE PROTECTION PRODUCTS FOR RV’S PROTECT your on board or carry on Electric & Electronic Devices from Harmful Lightning & Power Surges with Lectra Shield! Lectra Shield LS E120 Hybrid Parallel Hardwire Power Surge Protector is a 3 wire device with an LED indicator, reacts fast, clamps tight, provides 100,000 amps of surge current protection and is designed to automatically reset after each surge with in ratings for 120 Volt AC 30 Amp applications can be installed in an RV or an RV Pedestal Lectra Shield LS E240 Hybrid Parallel Hardwire Power Surge Protector is a 4 wire device which can also be used for 3 wire applications by tying it’s white Neutral & green Ground wire together & connecting it to Neutral, Ground, or a Neutral/Ground bond-ed connection, with an LED indicator for each phase, reacts fast, clamps tight, provides 200,000 amps of surge current protection, 100,000 amps per phase & is designed to automatically reset within ratings for 240 Volt AC Power 50 Amp applications can easily be installed In an RV or an RV Pedestal. Lectra Shield LS E120 Hybrid Parallel Maximum Surge Current (8x20?s): 100,000 Amps Total Maximum Operating Voltage: 120 Volts AC Maximum Surge Voltage (1.2x50?s): 20,000 Volts Typical Leakage Current <5? amps Clamping Voltage: 130 Volts RMS Operation Temperature: - 40 to +85°C Clamping Response Time: <5 nanoseconds Connectors: 3 Wire 14 AWG Current: Non-Load Bearing Lines Protected: L-N, N-G, L-G VPR Rating: 600/600/1000 Installation Configuration: Parallel Design: Hybrid Weight: 1 lb. Operation Indicators: 1 LED Dimension: Depth 2.25" Width 2.844" ETL Listed: Conforms to ANSI/UL 1449 3rd Ed. Standard Dimension: Length 5.694” (including tabs) Lectra Shield LS E240 Hybrid Parallel Maximum Surge Current (8x20?s): 200,000 Amps Total Maximum Operating Voltage: 120/240 Volts AC Maximum Surge Voltage (1.2x50?s): 20,000 Volts Typical Leakage Current: <5? amps Clamping Voltage: 250 Volts RMS Operation Temperature: - 40 to +85°C Clamping Response Time: <5 nanoseconds Connectors: 4 Wire 12 AWG Current: Non-Load Bearing Lines Protected: L-N, L-G, N-G, L-L VPR Rating: 900 L-N/800 L-G/1200 N-G /1200 L-L Installation Configuration: Parallel Design: Hybrid Weight: 1 lb. Operation Indicator: 2 LEDs 1 per phase Dimension: Depth 2.25" Width 2.844" ETL Listed: Conforms to ANSI/UL 1449 3rd Ed. Standard Dimension: Length 5.694” (including tabs) Model: LS-E120 : $135.00 LS-E240 : $250.00