OutBack Power FLEXware ICS Plus Combiner Components
The RSI is the rapid shutdown initiation device. This is installed in an
accessible location where the first responders on site can use it to shut
down the solar system. The RSI also will indicate a rapid shutdown or arc
fault shutdown with LED status. The system is manually shutdown, or reset,
by turning the disconnect handle. The auxiliary contacts in the RSI can also
be used to signal the inverter in the system to shutdown using the inverters
remote on/off switch.
The BKR-CTRL-DC is the power supply and control for the relay-trip breakers
PNL-75-DC-RT, PNL-75D-DC-RT, or PNL-75Q-DC-RT installed in the power center
to disconnect the charge control end of the PV circuit on rapid shutdown.
The BKR-CTRL-DC can be installed in a panel breaker space or surface mounted
and can power up to 2 relay-trip breakers and six ICSPlus combiner boxes.
The relay-trip breakers install in place of the array breakers in the power
center and act to disconnect the PV output circuits from the potential back
feed from the charge controls. They are available with one, two, or four
poles for the same number of combiners and charge controls. Each breaker
takes up the number of spaces that there are poles plus one more.
The PWRSPLY-24 is a 48 VDC to 24 VDC power supply for use with the RSD-AFCI
kit with the FM100 and the SkyBox-RSD1 kit with the SkyBox.
Use the LBL-PVRSS label to identify the rapid shutdown system to meet 2014
NEC code.
OutBack
Power FLEXware ICS Plus Combiner Components
|
| Manufacturer Part Number |
Description |
Length |
Width |
Height |
Weight |
Item Number |
| BKR-CTRL-DC |
DC Breaker Control & Power Supply |
6.0 |
6.0 |
2.0 |
2.0 |
053-03321 |
| RSI |
Rapid Shutdown Initiator |
16.0 |
8.0 |
8.0 |
6.0 |
053-03320 |
| PWRSPLY-24 |
48 VDC to 24 VDC power supply for FM100 and SkyBox RSD kits
|
6.0 |
6.0 |
2.0 |
2.0 |
053-03310 |
| LBL-PVRSS |
NEC 2014 code label for RSD |
6.0 |
2.0 |
0.1 |
0.1 |
053-03312 |
|
EcoVantage Mobile Catalog
