EcoVantage Mobile Catalog


Home: EcoVantage Mobile Catalog: Electronics: Inverters Battery Base:

Exeltech XP600 Sinewave Inverter
Cat. No. ELX-XP600

Made in America, EXELTECH XP SERIES INVERTERS are the most affordable, reliable, lightweight and best regulated, true sine wave inverters available. The XP SERIES inverter will operate any AC load anywhere. Ultra lightweight, yet rugged enough for the most extreme mobile environments, and are UL listed to 1950 for telecom applications. The XP SERIES is available in 100Vac, 120Vac, or 230Vac in 50Hz, 60Hz or 400Hz and suited for multiple applications, worldwide.

- True Sine Wave

- 600  Watts

- 12 Vdc to 108 Vdc Input

- Rack Mount Optional

- Remote Switching

- 21.5 Years MTBF


DC INPUTS (12 VDC - 108 VDC)
: a 6' non-terminated, two conductor
power cord is provided. Insulation on the negative (-)conductor is black and insulation on the positive (+) conductor is red.

AC OUTPUTS:one NEMA-15 outlet (standard wall receptacle) is located on the Front Panel.

LOW BATT / THERM BUZZER ; produces an audible alarm if DC input voltage falls to a level within 2% to 4% of the low limit of inverter, or, if there is an over temperature condition.

OVER VOLTAGE PROTECTION: If input voltage to the inverter exceeds set limits, the inverter will immediately and without warning shut off. When input voltage returns to normal range, the inverter will immediately restart. Since high over voltages tend to have very fast edges, the inverter must shut down quickly to protect itself. This kind of fault usually occurs if the battery is suddenly disconnected from the system and the battery charger continues to supply current.

UNDER VOLTAGE PROTECTION: When battery voltage falls to within 2% to 4% of low line voltage, the LOW BATT / THERM buzzer will sound. If the condition continues without reducing load to the inverter or adding charge to the battery, the inverter will shut off. When voltage rises to approximately 95% of nominal battery voltage, the inverter will turn back on and the alarm condition will clear. The inverter can be manually reset by cycling the on/off switch. This will reset the protection circuitry and turn the inverter on at any voltage above minimum voltage.

Output Power
Continuous Power
Surge Power
No Load Power
Output Voltage
Output Current
Weight LBS.
600 Watt**
1100 Watts
8 Watts
100 +/- 6%
6.0
6.5
600 Watt**
1100 Watts
8 Watts
120 +/- 6%
5.1
6.5
600 Watt**
1100 Watts
9 Watts
230 +/- 6%
2.7
6.5

Input Power

Model Voltage
Minimum (Typical)**
System (Typical)
Maximum (Typical)**
Typical Efficiency @ Full Power
Peak Efficiency @ 1/3 Power
12Vdc
10.4/10.6Vdc*
13.8Vdc
16.5Vdc
85%
87%
24Vdc
19/21Vdc*
27.6Vdc
33Vdc
87%
89%
32Vdc
26.5/28Vdc*
36.8Vdc
44Vdc
88%
90%
48Vdc
41.5/42.1Vdc*
55.2Vdc
62Vdc
87%
89%
66Vdc
57.5/58.5Vdc*
75.9Vdc
91.1Vdc
88%
90%
108Vdc
94/95Vdc*
125Vdc
149Vdc
87%
90%




*Indicates typical cut-off voltage/warning buzzer voltage

** +/- 3%


Model:

Option:

Option 2:

Option 3:

Option 4:

Option 5:

Voltage:





eM
© 2015
EcoVantage Energy Inc

Home

Visit Our Full Website