Trimetric 2025 Cat. No. AEE-028-0002x

$220.00

This amp-hour meter for 12- or 24-volt battery systems (and 48-volt with adapter) reads volts, amps and amp-hours on an LED  display. Amp-hours can be displayed in actual amp-hour numbers or as “% full”. An LED lights when the battery is charging and flashes when the battery has been fully charged. Another LED flashes when batteries should be recharged, equalized, and during low battery voltage. It also records min and max voltage, days since batteries were last charged, days since equalized, and total lifetime amp-hours withdrawn from the batteries. The Trimetric can be located hundreds of feet away from batteries using inexpensive 4-conductor twisted-pair meter wire. For 48V systems or additional lightning protection on 12/24 V systems, use a 48V adapter with the meter. A shunt is required for operation. Use the 500-amp shunt if you have a 12V inverter larger than 800 watts or a 24V inverter larger than 1600 watts. Use a 1000- amp 100mV shunt for systems with stacked SW inverters or where continuous current is over 300 amps. The 1000A/100mV shunt has the same resistance as the 500A/50mV shunt and may be used interchangeably. Order shunt separately. Allows for a maximum battery bank size of 2500 amp-hours. The positive lead to the Trimetric should be fused with a 1-amp fuse. Flush mount or use wiremold box to mount. Made in USA. Dimensions: 4.5" x 4.75". 2-year warranty Description Item code Trimetric 2025 amp-hour meter 28.0024 48-volt adapter 28.0023 Surface mount box 28.0026 500A/50mV shunt 28.9253 100A/100mV shunt 28.9245 1000A/100mV shunt 28.9254     Model: TM-2025-A-F, 028-00024 TM-2025-RV-F, 028-00025 Option: No 48-volt adapter 48-volt adapter : $28.00 Option 1: No Surface mount box Surface mount box : $11.00 Option 2: No Shunt 500A/50mV shunt 28.9253 : $45.00 100A/100mV shunt 28.9245 : $50.00 1000A/100mV shunt 28.9254 : $70.20