Safety Lock D Cat. No. 091-174 Weight 2 lbs

$137.90

The Safety Lock D permits an operator of a police car or ambulance to leave the vehicle without stopping the engine. This maintains the alternator output to run the radio, computer, and lights. The simple pressing of a button and removal of the key is all that is required. Upon the operator's return the insertion of the key into the ignition lock returns the system to normal operation. The Safety Lock D when installed in a vehicle permits the engine to run with the key removed. Certain vehicles, namely Chrysler and Jeep, are designed with anti-theft components to prevent running the engine without an ignition key. The Safety Lock D is designed specifically to permit the engines to run with the key removed. A simple push-button switch sets the Safety Lock D. Unauthorized operation by a would be "Joyrider" or thief is prevented as any attempt to shift the transmission into gear will stop the engine. Once stopped, the engine can only be restarted with the normal key. A Red LED in the push-button switch illuminates as a reminder when the Safety Lock D is set. A Pre-wired switch and connector is supplied with the Safety Lock D. A Controller that Permits Unattended Engine Operation but Prevents Unauthorized use of the Vehicle Simple Installation Permits Engine to Run with the Ignition Key Removed Engine Stops and Cannot be Restarted if Attempt is Made to Drive Away Specifications: Volts: 12 volts, D.C. Relay Contacts: Normally Open, 10 Amps. Weight: 4 ounces Enclosure: unsealed Warranty: 3 Years Outline Drawing Instruction Manual (.pdf file, 57Kb)