SmartHarvest 50V Maximum Power Point Tracking (MPPT) charge controller Cat. No. SCCP05

PWM charge controllers are an elegant, proven system solutions.  SmartHarvest's SCCP05-050 scales this economical solution for use in small PV systems dedicated to specific applications, such as powering a light, an appliance or charging a back-up battery system connected to a smart phone, PC, wireless network adapter or other critical electronic device. PWM charge controllers use advanced digital signal processing to anticipate battery charging needs and affect the right amount of control.  They are an excellent choice for smaller systems operating under consistent solar conditions where utilizing economical PWM technology helps allocate more of the system budget to other areas such as energy storage.  The SCCP05-050 is the perfect charging solution when performance and economics are of equal priority. Please note SmartHarvest by OutBack products are not designed for connection with OutBack communication devices. For more information on product capability, please contact sales or technical support.  SMARTHARVEST SPECIFICATIONS SCCP05-050 SCCP10-050 Maximum Output Current (I) 5 10 Nominal Battery Voltages 12/24 Input Panel Power (Wp) 60/120 120/240 Panel Intelligence PWM Maximum Input Voltage (Voc) 25/50 Charging Regulation Four stages: bulk, absorb, float and equalization Bulk Voltage (VDC) Flooded: 14.8/29.6 VRLA: 14.6/29.2  Absorb Voltage (VDC) Flooded: 14.8/29.6 VRLA: 14.4/28.8  Absorb Time 2 hours  Float Voltage (VDC) Flooded: 13.2/26.4 VRLA: 13.5/27.0  Equalization Voltage (VDC) (Flooded Batteries Only) Flooded: 15.5/31.0  Equlaization Time 1 hour  State of Charge Low Voltage Disconnect (V) 11.4/22.8V Low Battery Load Reconnect (VDC) 12.4/28.4  High Battery Load Disconnect (VDC) 15.0/30.0 Temperature Compensation -5mV/°C Battery Type Selection VRLA/Flooded—selectable via jumper.  Factory default VRLA (jumper inserted) Data Logging Available with monitoring software. Standby Current (mA) 6.8 Display 3 LEDs IP Class IP20 Operating Temperature Range -40° to 60° C Humidity 0-95% RH non-condensing Dimensions HxWxD (in/cm) 2.6x6.3x1.0 / 6.8x15.9x2.5 2.6x6.3x1.0 / 6.8x15.9x2.5 Weight (lb/kg) .39 / .18  Certifications CE, IEC/EN 62109-1 Warranty Standard 2 year Model: SCCP05-050 : $63.00 SCCP10-050 : $72.00