MAC3 Wind Speed Alarm & Controller
Maximum’s MAC3 Wind Speed Alarm & Controller is used to measure and
display wind speed from 0 to 200 MPH, km/h, m/s or Knots. MAC3 allows
the user to set two different wind speed readings at which they would
like to be notified, both visually and audibly, when the wind meets
either set-point. This instrument also contains two internal SPDT
relays, which allow the operator to open or close the circuit leading
to an external appliance, based on the selected wind speeds. A built in
latching switch helps protect attached equipment from cycling on/off
repeatedly as set points are met.
MAC3 Wind Speed Alarm - 12 & 24VDC | Multi-function,
dual set-point wind speed alarm with optional 2 x 5-amp SPDT relays,
password protection and multi-sensor option.
Dimensions: 7.39"H x 5.08"W x 2.26"D
Weight: 1.58 lbs
|
MAC3
is used in various commercial applications including cranes
(mobile, gantry and stationary), amusement parks, fountain controls,
entertainment (special effects), outdoor signage, home automation and
agricultural monitoring.
The
MAC3 Wind Speed Alarm & Controller utilizes a micro-processor
circuits, which allows for numerous features such as recording of high
gust, average wind speed, password protection, multi-sensor operation,
etc... All circuitry is housed in an IP65
rated polycarbonate case. The #400 anemometer used to capture wind
speed has been used by Maximum in commercial applications for more
than 30 years, and has proven to be both reliable and durable over
that period. A shielded cable is used between the sensor and the
indicator as it offers better surge and interference suppression
compared to non-shielded cable.
All
MAC3 instruments are pre-wired during production and tested for
accuracy & effectiveness before being packaged for shipping. We
recommend a bench-test of the pre-wired instrument prior to
installation to ensure that all is in working order. Proper
installation of this instrument is the only way it will operate. If not
installed properly, it will not function at all. This ensures that only
properly installed instruments are being used. Installation is
basic, including utilization of the internal relays.
Operation
requires the user to set the speeds at which he/she would like to
be notified. When the wind speed meets or exceeds the speed settings, a
visual and audible signal will notify the operator that wind
speeds have met the set-point on the instrument. A Password
Lock feature prevents the speed settings from being
inadvertently adjusted.
Like all Maximum commercial instruments, our MAC3 carries a 5-Year Warranty.
AC adapter available.
|
EcoVantage Mobile Catalog
