The ultimate LED refit light; Sigma (surface-mount), like the recessed
version, is a full featured LED down light that is dimmable using the vessel's
existing 2-wire boat cable and is also compatible with some existing halogen
digital dimmers. It's surface-mount bezel simplifies installation as it does not
require a recess cut-out or can be placed over an existing hole where a smaller
fixture once was located. A 10-40VAC/DC universal input allows Sigma to be used
with 12V, 24V, or 32V systems and for voltage supplied by magnetic AC
transformer as well.
- Dimmable with existing 2-wire boat cable (DC voltage only)
- Compatible with some existing DChalogen dimmers
- Convenient surface-mount bezel design
- 10-40VAC/DC input voltage (from battery or magnetic transformer)
- Part of matching family (small, large, surface-mount fixture)
Trim Ring (Bezel) Finish/Material |
Stainless steel
|
Housing Finish/Material |
E-coat aluminum |
Lens Material |
Acrylic polymer |
Trim Ring (Bezel) Dimensions |
3.57" (91mm) dia x 0.34" (9mm) height |
Base Dimensions |
4.07" (103mm) x 1.25" (32mm) |
Input Voltage |
10-40VAC/DC |
Power Consumption |
5W |
Driver |
Integrated |
Output Color |
Cool White/ Worm White
|
Luminous Flux |
230 lms |
Correlated Color Temperature (CCT) |
6400K |
Color Rendering Index (CRI) |
67 |
Beam Angle |
83 dg. |
Max Operating Temperature |
130 dg. F (54 dg. C) |
Lifetime Hours |
50,000 hrs. (L70) |
Dimmer Compatibility |
Intervolt DC Dimmer recommended (not compatible with AC
dimming) |
Dimmer Control Interface |
N/O, 1P/1T Momentary Push-Button |
Mounting Method |
Screws |
Install Location |
Ceiling, interior/exterior |
Ingress Protection |
IP65 |
Class |
Class III |
Electrical Protections |
Reverse Polarity, Transients, Spikes |
Certifications & Compliance |
CE-EMC |
Manufacturer |
Imtra |
Warranty |
5 years |
|