|
Home: EcoVantage Mobile Catalog: Emergency & Specialty Vehicles: Load Centers:
Power Distribution System, PDS-100 Cat. No. K-390-5711-0 | $402.50 |
The
PDS-100 provides emergency and public safety vehicle electronics
installers with a convenient, efficient, safe and dependable method for
adding distribution, circuit protection, timer and power control to
communication electronics and electrical devices. Its compact size
allows installation under consoles and in interior compartments (not
intended for installation in engine compartment). As a standalone power
distribution system, there is no interference with the vehicles factory
installed wire harness; the PDS wires directly to the vehicle battery.
Each of the 6 circuits are individually fused (ATO /ATC type) and wired
to power-on/fuse fail indicator LED’s which simplifies circuit
troubleshooting.
- Quick and easy way to connect, protect, and program power to emergency vehicle accessories
- Provides
6 dedicated fused circuits configured in 3 load group to power radios,
emergency lights, siren, video, MDT, radar, and more
- Flexible
circuit activation/deactivation allows installer to set battery power
use priority independently per 2 circuit Load Group:
- Powered Only With Ignition
- Timed Disconnect
- Always On With Load Group LVD
- Always On, No Load Group LVD
- Each circuit is fuse protected with LED indicator
which identifies the blown fuse position, simplifying trouble shooting - Master Low Voltage Disconnect protects batteries from extreme discharge
- Heavy duty studs for battery connections
- Screw terminals for secure load connections
- Increase circuit capacity by wiring multiple PDS using parallel busing kit
Input: 12V, neg. ground
Power Consumption: Idle: 8mA, Active: 180 mA/circuit
Maximum Load per PDS: 100A, 20A max. per fuse position
Maximum Load Per System: 3 PDS wired in parallel, 18 circuits
Fuse Type: ATC/ATO (not included)
Programmable Shutdown per Load Group: 2 min. – 13 hours
Disconnect Range: 11.8 - 10.6V DC
Master Low Voltage Disconnect: @ 10.5V (factory programmable 10.0 - 11.8V)
Case: Powder coated aluminum
Bus: Nickel plated copper
Protective Cover: Top panel connections and switches
Weight: 2 Lbs.
Warranty: 3 Years
Instruction Manual.pdf (872 Kb)
Datasheet.pdf (1.38 Mb)
|
|
|