Auto Pump 12 Volt AD, Model #: 091-9-AD
The Auto Pump 12 Volt AD is an 091-9 Auto Pump with an Automatic Drain
installed. A normally open solenoid valve drains the moisture
from the
trap each time the compressor shuts down. The Auto Drain assures that
the filter bowl is always drained and does this without intervention by
maintenance personnel.
The 091-9-AD is a small air compressor
designed to mount on vehicles with air brakes to maintain the air
pressure in the air brake system while the vehicle is not in use. A
pressure switch senses when the system pressure drops and starts the
compressor which then runs until pressure is restored. All ball bearing
construction, lubricated for life, assures reliable operation and
requires no servicing
|
100 PSI Max |
|
Automatically drains
moisture every time pump runs |
|
Eliminates all routine maintenance associated with
moisture trap |
|
Maintains air pressure in the vehicle brake
system |
|
Completely automatic operation controlled by
integral pressure switch |
|
No interference with operation of the engine
mounted air compressor |
|
Small size, mounts in any dry location |
|
1 year warranty |
Input: 12 Vdc @ 12 Amps Max
Output: .30 SCFM @ 80 PSI
.35 SCFM @ 60 PSI
Motor Type: Perm. Magnet .10 HP
Pressure Switch: Adjustable Set-Point
Factory set to 75 PSI
Cut-In, 95 PSI Cut-Out
Weight: 7 lbs
Warranty: 1 Year
Auto Pump 12 Volt AD - 091-9-AD.pdf
(149 Kb)
|