MAINTENANCE-FREE, VALVE-REGULATED,
SEALED LEAD ACID BATTERIES.
DESIGNED FOR DEEP CYCLE / BACK-UP POWER
PHOTOVOLTAIC APPLICATIONS.
Standard Terminals: All "T" batteries now incorporate copper
alloy M8 terminals except the PVX-340T & PVX-420T which are M6. All
batteries supplied with silicon bronze bolts, nuts, and washers as
required for installation. No exposed lead terminals. This change was
made to improve environmental safety and health. Torque Value M6: 35
in-lbs / 4.0 nm. Torque Value M8: 70 in-lbs / 7.9 nm. Optional
Terminals: L Blade or Automotive post type terminals are available
installed by adding the appropriate suffix: "L" for L Blade or "A" for
automotive post. Handles: All part numbers include lifting handles
except the PVX-490T, PVX-560T, and PVX-2240T. Ratings: Capacity ratings
are stated at 77F (25 C) to 1.75 volts per cell. Drawings: Click on the
part number in the table above or contact the factory.
SUN-XTENDER® BATTERY DESIGN FEATURES
Copper Alloy Terminals for improved electrical connections.
No exposed lead terminals. This change was incorporated to improve
environmental safety and health.
Threaded insert terminals are recessed to prevent short circuits
across battery connections.1
New cover is flat top design. No protruding or exposed vent valves.1
Built in lifting handles, except PVX-490T, PVX-560T, and PVX-2240T.
Reinforced container walls to reduce bulging.
High Impact Strength Copolymer Polypropylene Case and Cover.
Completely Sealed Valve Regulated Construction.
Immobilized Electrolyte Non-Spillable.
Maintenance Free Design Never Requires Watering.
Absorbed Glass Mat (AGM) Micro-porous Glass Separators retain
electrolyte.
Flame Arresting Pressure Regulated Safety Valves.
UL Recognized Systems Component.
Positive Plates - Proprietary Lead Calcium Alloy- Negatives Plates
- Lead Calcium.
Low Self Discharge Rate Approximately 1 % per month at 25 C (77 F).
Operate over a Wide Range of Temperatures from -40 C (-40 F) to +72
C (+160 F).
Classified as "Non-Spillable Battery" for transport. Complies with
DOT HMR49, Non-Hazardous Materials.
1 Threaded Insert "T" type Features.
CHARGING INSTRUCTIONS
Initial
charge or recharge: 2.37 to 2.40 volts per cell at 25 C (77 F). Float
charge: 2.20 to 2.22 volts per cell at 25 C (77 F). Equalize charge:
2.40 volts per cell at 25 C (77 F). Temperature compensation =
±3.75
mV. per cell per degree C [Reference to 25 C (77 F)]. This is for
battery temperature (not ambient temperature) and is useful for battery
temperatures from 0 C (32 F) to 40 C (104 F). Contact Concorde Battery
Corporation for temperatures that exceed this range.
Specifications subject to change without notice.
12 Volt Nominal Capacity Ampere Hours @
25° C (77° F) to 1.75 volts per cell
|
Part
Number
|
Industry
Reference
|
Overall
Dimensions
|
Unit Wt
|
Nominal Capacity Ampere Hours @ 25° C (77° F) to 1.75 volts per cell |
|
L
|
W
|
H
|
Lbs
Kgs
|
8
Hr
Rate
|
24
Hr
Rate
|
48
Hr
Rate
|
100
Hr
Rate
|
120
Hr
Rate
|
|
in
mm
|
in
mm
|
in
mm
|
|
PVX-340T
|
U1
|
7.71
196
|
5.18
132
|
6.89
175
|
25
11.4
|
30
|
34
|
36
|
37
|
38
|
|
PVX-420T
|
U1 Tall
|
7.71
196
|
5.18
132
|
8.05
204
|
30
13.6
|
36
|
42
|
43
|
44
|
45
|
|
PVX-490T
|
22NF
|
8.99
228
|
5.45
138
|
8.82
224
|
36
16.4
|
43
|
49
|
52
|
54
|
55
|
|
PVX-840T
|
24
|
10.22
260
|
6.60
168
|
8.93
227
|
57
25.9
|
74
|
84
|
90
|
96
|
97
|
|
PVX-1040T
|
27
|
12.01
305
|
6.60
168
|
8.93
227
|
63
28.6
|
93
|
104
|
112
|
118
|
120
|
|
PVX-2580L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
i |
EcoVantage Mobile Catalog
