Battery Cap - Econ-O-Flip Cat. No. WM-2050-PH

It flips open .... Flips Closed and rotates Enginnerd and Designed for Ease of Inspection, Servicing and Watring and Ecompasses Flip-Top Orientation Through 360 Degrees An injection molded “flip-top” vent-cap addressing areas of safe and efficient maintenance during the routine servicing of industrial, semi-industrial, and golf cart batteries When a battery is equipped with the economical and reliabLe “ECON-O-FLIP SPEED-VENT”     ADVANTAGES There is no need to remove vent-caps for inspection, servicing or watering The handling of acid-ladened vent-caps is a thing of the past: just FLIP-OPEN. FLIP-SHUT — Less physical exposure to electrolyte [sulphuric acid] Removed vent-caps are no longer misplaced due to dropping on the floor, rolling under truck or charging station equipment and/or lodging between battery and battery truck compartment Transfer of electrolyte from removed vent-caps being placed on top of battery during servicing or watering is eliminated The ELECTROLYTE RETURN PROBE encourages and directs any accumulation of electrolyte from the surface of the FLIP-TOP BAFFLE ASSEMBLY downward Battery top layout and use of intércell connector and terminal shrouds will at times complicatethe positioning of flip-top vent-caps — ECON-O-FLIP?s “flip-top” orientation through 360o will compensate for this potential top assembly interferenceS     AND REMEMBER The “ECON-O-FLIP” can be RETRO-FITTED to any U.S. manufactured industrial battery and most semi-industrial and golf cart batteries The availability of ADAPTERS will facilitate a proper fit for all imported batteries such as Cloride. Fulman, Varta. etc. Where necessary. THICKER SEALING GASKETS are available for vent-cap installations relative to older batteries or distorted cell covers Its design accommodates all single-cell fillers [watering wandsi having nozzle diameters of up to 3/4 inch FLOW SYSTEMS makes available an injection-molded slip-on 7/8-to-5/8 inch NOZZLE REDUCTION ADAPTOR for any filler having the Large nozzle FLIP-TOP labor savings. during servicing, versus the standard vent-cap, will more than compensate for the costs within the first 6 months Part Number Height   2050 Standard Height [?] 0.955"  2050C Medium Height 1.275"  2050EX Extra Height 1.455" Option: Push in 2075 : $0.63 Bayonet 2050 Sizes: Standard Height : $1.90 Medium Height : $2.00 Extra Height : $2.25