Water-Miser Safety-Vent
Engineered and Designed to encompass all area of
concern - Ease
of Inspection and Watering. Battery-top Mositure Recuction, Electrolyte
Retention within Cells, Exteded Watering Invervals, Fumer-Freer
Environment, As well as Flame
and/or Spark reardant Characteristics
An injection molded “ftip-top” vent-cap addressing areas of safe
and efficient maintenance during the routine servicing of industrial,
semi-industrial, and golf cart batteries
When a battery is equipped with the economical and reliable
“WATER-MISER SAFETY-VENT”
ADVANTAGES
- There is no need to remove vent-caps —just FLIP open for
inspection and watering
- Escaping gases, exiting through the MOISTURE-RETURN MEDIUM
during
the charging cycle, carry fewer electrolyte laden droplets, assuring
that cell electrolyte gravities are being better maintained
- CONSISTENCY of intended cell voltages and capacity
characteristics are ENHANCED
- Tops of the batteries remain much DRIER
- Cell to cell and battery to equipment body-grounding is
respectively reduced
- Extended watering intervals are achieved
- The bayonet quarter-turn design ASSURES PROPER FIT for all
U.S. manufactured batteries
- Orientation of the cover assembly through 360o
is standard
- The availability of ADAPTERS will facilitate a proper fit
for all imported batteries such as Cloride, Fulman, Varta, etc.
SAFETY FACTORS
- Externally initiated explosions, within the battery
cell(s). are
virtually eliminated due to the incorporation of the flame and/or spark
retardant HYDROPHOBIC CINDERED DISC
- The built in ANTI-SPLASH device assures that a minimum of
electrolyte is propelled into the immediate area when the FLIP-TOP is
opened for inspection or watering
- The handling of acid-ladened vent-caps is a thing of the
past:
just FLIP OPEN. FLIP SHUT — Lesser exposure to electrolyte [sulphuric
acid] as fumes and/or liquid
- A greater safety factor for the operator who now works in a
more
friendly, fume-freer environment made possible by the MOISTURE-RETURN
MEDIUM coupled with the HYDROPHOBIC CINDERED DISC
AND REMEMBER
- The "WATER-MISER SAFETY-VENT?" can be RETRO-FITTED to any
U.S.
manufactured industrial battery and most semi-industrial and golf cart
batteries
- Its design accommodates all single-cell fillers having
nozzle diameters of up to 3/4 inch
- FLOW SYSTEMS makes available an injection-molded slip-on
7/8-to-5/8 inch NOZZLE REDUCTION ADAPTOR for any filler having the
large nozzle
- FLIP-TOP labor savings, during servicing, versus the
standard
vent-cap, will more than compensate for the costs within the first 6
months
| Part
Number |
|
Height |
|
|
|
|
|
| 2000 Standard Height |
|
0.955" |
|
|
|
|
|
| 2000C
Medium Height |
|
1.275" |
|
|
|
|
|
| 2000EX Extra Height |
|
1.455" |
|
|
|
|
|
|
EcoVantage Mobile Catalog
