NAV-PAC®
Mobile
communication electronics such as programmable two-way radio and data
transceivers, vehicle location systems and other
microprocessor-controlled devices require clean and steady DC input
power. Their sensitive circuitry is highly vulnerable to voltage drop
from engine start, noise and line spikes from alternators and motors,
and conducted noise from various other electronic devices. NAV-PAC
prevents all of these problems.
- Prevents voltage ”drop-out” to electronics during engine start
- Absorbs line "spikes"
- Filters out electrical interference
- Provides supplemental voltage/battery back-up for up to 15 min.
- Remote monitor panel included.
NAV-PAC has
been successfully employed for years by thousands of Fire Trucks and
other Emergency Service vehicles nationwide
U.S. PATENT #: 5172292
Model: NP-12
Output:15 amps Max. @ 12 Volt
Back-Up
Power:
8 Amps for fifteen (15) minutes
12 Amps for eight (8) minutes
18 Amps for two (2) minutes
Battery: Sealed Rechargeable 4.0 Amp-Hour, 5-7 years typical
life, can be replaced. Low-voltage disconnect circuit
protects battery from total discharge. Certified by DOT and IATA for
shipment by air.
Noise Filtering: Audio through 200 MHZ
Voltage Spike Protection: Transient energy capability; 100 Joules, 4,000 amps
Max (8 x 20 micro seconds) |
Size
Inches
|
Centimeters
|
Weight
|
H
|
W
|
D
|
H
|
W
|
D
|
lbs.
|
Kg.
|
5.25
|
6.2
|
7.4
|
13.3
|
15.7
|
18.8
|
5.9
|
2.7
|
Panel Dimensions: 3.5” W x 2” H (8.9 x 5.1 cm)
|