Complete Name: Intellitec Controllers Brief Information: Slideout
Control Module 300 Complete Overview: Intellitec's Slide-Out
Controllers are
a part of the expanding family of the MONOPLEX™ System. These
controllers are designed to control the operation of a slide-out room
electrical mechanism. The controller automatically stops the slide-out
when it reaches it's inner or outer limit by sensing the current drawn
by the motor. This eliminiates the need for the owner to hold the
switch in the ""ON"" position for the entire extend/retract cycle, or
installation of the limit switches and associated wiring during
installation.
By utilizing MONOPLEX™ System switching, only one wire and a
ground lead are needed to connect to multiple switches, each with it's
own indicator. The control unit can be mounted near the motor mechanism
to ease installation and eliminate long heavy gauge wire runs.
To operate the room, the owner would simply press the button. The
indicator light will come on and the slide will move out. When the
slide-out reaches it's outer most limit, the unit will sense the rise
in current and switch off the power to the slide-out motor and
indicator light. To move the room back again, the owner will again push
the button, the indicator will come on and the room will move in. When
the slide-out reaches it's inner most position, the controller will
sense the rise in current and will shut off power to the motor and
indicator light.
If, at any time during the operation of the slide-out, the owner wants
to stop the room, he can push the button and it will stop. Pressing the
button again will start in the reverse direction.
| Specifications: |
| Operating Voltage |
10 - 16 VDC |
| Current Range |
4 - 14 Amps |
| Current carry capabilities |
| Continuous Current |
20 Amps |
| Stall Current Threshold |
20 - 50 Amps |
| Standby Draw |
2 milliamps |
| Operating Temperature |
-40°C to +85°C
-40°F to +185°F |
| Operating Environment |
Protected from direct weather. |
Warranty Terms: 1 Year
|
EcoVantage Mobile Catalog
