|OutBack MX60 and MX80 MPPT Charge Controller|
Cat. No. 715228
Weight 12 lbs
MX60 MPPT Charge Controller
Rated for up to 60 amps of DC output current, the OutBack MX60 can be
used with battery systems from 12 to 60 VDC with PV open-circuit
voltage as high as 140 VDC. The MX60ís setpoints are fully adjustable
to allow use with virtually any battery type, chemistry and charging
profile. The OutBack MX60 allows you to use a higher output voltage PV
array with a lower voltage battery Ė such as charging a 12- or 24-VDC
battery with a 48-VDC PV array. This reduces wire size and power loss
from the PV array to the battery/inverter location and can maximize the
performance of your PV system. Array size can be up to 707 watts when
charging a 12-volt battery, 1,500 watts when charging at 24 volts and
3,000 watts when charging at 48 volts.
The OutBack MX60 comes standard with an easy-to-use and understand
display of the PV systemís performance. The 4-line, 80-character
backlit LCD display is also used for programming and monitoring of the
systemís operation. The OutBack MX60 can also be connected to the
OutBack MATE system controller and display to allow monitoring of up to
eight MX60 controllers from a distant location Ė up to 300 feet away.
The MATE also includes an optoisolated RS232 port for connection to a
PC computer for data logging and system monitoring. ETL Listed.
Dimensions 14.5"H x 5.75"W x 5.75"D.
Weight: 12 lbs.