Schneider Electric C-35, C-40 and C-60 PWM Controllers Cat. No. C-35 Weight 4 lbs

Schneider Electric C-35, C-40 and C-60 PWM Controllers The Schneider ElectricC-35, C-40, and C-60 PWM (pulse width modulator) controllers can be used as PV charge controllers, DC load controllers or DC diversion regulators in 12-, 24- and 48-volt systems (except only the C40 can be used in 48-volt systems). They operate in only one mode at a time, so to provide both PV charge controller and low battery load disconnect, two controllers must be used. As DC load controllers they disconnect the load at a user-settable low voltage and reconnect at a higher voltage reconnect point. As diversion controllers they send excess power to a “dummy load” (such as a water or space heater) to regulate hydroelectric or wind generators. When used in diversion mode, derate the amperage by 25%. All Xantrex controllers, when used as a charge controller, have field-adjustable bulk and float setpoints and perform automatic equalization every 30 days or whenever LVD is reached. Equalization can be manually initiated with automatic shut-off. Order the optional temperature sensor for a more accurate battery charge controller. The optional LCD digital display shows battery voltage, array amps and watts, cumulative amp-hours and a separately resettable “trip” amp-hour measurement. The digital display is available for mounting on the front of the charge controller, or with a 50- or 100-foot cable for remote mounting in a double-gang electrical box. UL Listed. 2-year warranty. Model: C-35 : $119.00 C-40 : $159.00 C-60 : $199.00 Option: No Temp Sensor BTS/15 Battery Temp Sensor w/15 ft : $29.00 BTS/35 Battery Temp Sensore w/35 ft : $32.00 Option 1: No Display CM - Digital Display Front Mount : $99.00 CM/R50 - Remter Display 50 ft : $126.00 CRM/R100 - Remote Display w/100 ft : $146.00