|Iota 75 Amp 12 VDC Charger|
Cat. No. DLS75-IQ4
Weight 8 lbs
The DLS-75 features a Two-Step Voltage Jack which allows
switching from a long-term float voltage of 13.6vdc to 14.2vdc for
rapid charging by simply inserting the dual voltage plug (included)
into the jack.
Using state-of-the-art, switch-mode technology, the DLS Power
Supply series is engineered with the user and variable environmental
conditions in mind. Extra care has been given to insure many years of
service-free operation, even when subjected to extremely harsh
conditions. Batteries are charged quickly and efficiently without over
charging and pumps, motors, and fans operate perfectly for prolonged
- 75 Amp Converter
- 1000 Watt Power Output
- Dual Voltage Jack for 2-Stage Charging Internal or external IQ options available
- Weight; 7.8 lbs
- DImensions; 10" x 6.5" x 3.5
- IQ4 Buit in
IOTA Engineering uses advanced switch mode technology to bring to
market highly sophisticated electronic converter/power supplies at
Exceptionally clean DC output insures pumps, motors, fans, and lights
work perfectly. This means longer life for any connected load;
virtually no AC ripple to cause static or premature failure of radio or
The DLS series converter/charger quickly and efficiently charges
batteries from the full rated output of the DLS. The DLS then maintains
the batteries, only putting into the battery what is required by load
or self discharge, cutting back to milliamps as the battery requires.
Low and transient AC line voltage is a major cause of converter/power
supply failure. The DLS series converter/power supply is protected
against low line voltage, as well as spikes coming from the AC power
source or from improperly adjusted generators.
The DLS series converter/power supply meets F.C.C. criteria, minimizing
radio and television equipment interference, especially on the lower
The DLS series converter/power supply can be used with or without a
battery. When used as a converter/power supply, the DLS model will only
supply what is required by the load. When not in use it is essentially
off, reducing electricity usage.
Even in its subcompact size, the DLS series converter/power supply, at
full load, has an operating temperature half that of some switch mode
electronic models. This means substantially longer life and safer
Tight line-load regulation ensures that the output voltage holds steady
from no load to full load. This keeps pumps, motors, and lights working
at the correct voltage even during brown out situations.
Proportional Fan Circuitry provides an extra measure of protection.
During times of heavy load demands, the automatic circuitry will
activate the fan before thermal stress can occur on any internal
components. Reliability and durability is built into all DLS models.
In the event the batteries or the DLS unit is wired incorrectly, the
DLS converter/power supply is protected from damage. External fuses can
be quickly and easily replaced.