Pro Installer Single Insulated Stud Cat. No. BEP-IST- Weight 1 lbs

The Pro Installer insulated studs are a smart choice for marine installers. Increased stainless steel stud length allows up to three large cable lugs to be connected. The clear polycarbonate cover provides insulation/protection, while the snap-out side skirts allow for additional cable entry. The power tapping plate variant provides additional termination points for small cables. Features & Benefits: Modular sizing and common interconnection height: Easily linked with other Pro Installer Busbars and Fuseholders saving installation time and space Power tapping plate converts from a single stud, adding four connection points for smaller cables, while preserving access for larger cables Compact footprint saves space Generous stud lengths allow securing of three 95mm² (3/0) cable lugs Innovative clear covers provide insulation/protection, with “snap outs” for extra cable access as required Label recess on cover allows fitting up to ½” width (12.7mm) printed labels Snap out partition on double stud base provides insulation to separate studs for isolated (positive/negative) application. Snapping this partition allows easy linking of the studs Insert moulded studs offer superior mechanical strength Four mounting holes in base allow installer choice of using two, or four fastenings depending on level of securing required Designed for the harsh marine environment Pro Installer Single 10mm Insulated Stud Specifications: Note: no power passes through the stud so no amp rating is given 50 VDC High temperature, fiber reinforced plastic base provides strength and chemical resistance Clear poly carbonate cover Stainless steel studs/screws, and nickel plated brass nuts for longevity in the marine environment All threads are metric Stud details: 1 x 10mm (3/8”) Insulated Stud Dimensions: 1.9" x 1.9" x 2.4" (49 x 49 x 62mm) Weight: 2.6 Oz (75g) Pro Installer Single 8mm Insulated Stud Specifications: Note: no power passes through the stud so no amp rating is given 50 VDC High temperature, fiber reinforced plastic base provides strength and chemical resistance Clear poly carbonate cover Stainless steel studs/screws, and nickel plated brass nuts for longevity in the marine environment All threads are metric Stud details: 1 x 5/16" (8mm) Dimensions: 1.9" x 1.9" x 2.4" (49 x 49 x 62mm) Weight: 2.5 Oz (70g) Sizes: IST-10MM-1S 10 mm : $10.90 IST-8MM-1S 8 mm : $10.73