|
Home: EcoVantage Catalog: Batteries: Battery Box's:
Chest-Style Battery Enclosures for 8 Surrette Batteries
Cat. No. DPW-BB-8SB
Weight 110 lbs | |
Non-insulated
Chest-Style
Enclosures Desiend for 8 Surrette Batteries
Chest-Style enclosures are manufactured from 1/8
aluminum and are powder coated with a bright white polyester prouder
coat finish. All enclosures include a reinforced top edge. Many
enclosures are listed for Concorde, Deka (MK), and Surrette batteries
but we can build them to virtually any size. The boxes have a stainless
steel padlock hasp. Please feel free to contact us for a quotation for
a size or enclosure not listed.
DESIGN
Keeping with our reputation for providing tough products our battery
enclosure line is no exception. All POWER-FAB battery enclosures
manufactured by Direct Power and Water Corporation are built to high
standards to provide a rugged, high quality product.
The standard chest enclosures are manufactured for Deka, Concorde, and
Surrette batteries in addition to the generic Groups 27/30, 4D, 8D,
L16, and golf-cart type batteries.
CONSTRUCTION
Standard enclosures are manufactured with .125 5052-H32 aluminum. All
die marks and welds are sanded smooth. and finished with a reflective
bright white polyester powder coat. This finish provides a highly
reflective surface to minimize internal heat gain.
All enclosures are provided with integrated louvers located low on one
side and high on the opposite side to promote convective air flow
through the enclosure to reduce internal temperatures and remove
gasses. Filters are located over the louvers to keep out dust and
insects. The filters are removable for cleaning or replacement.
NEMA STANDARDS
All standard enclosures are built to meet NEMA 3R specifications.
Enclosures are available in NEMA 4 and NEMA 4X for certain situations.
WARRANTY
All battery/equipment enclosures are provided with a limited five year
warranty.
| STANDARD
FEATURES |
.125 5052-H32 aluminum
White polyester powder coat finish
NEMA 3R design
Ground Skids
|
Stainless steel padlock hasp
Continuous stainless steel hinge
All welds ground smooth
Screened/ventilation louvers
|
OPTIONAL
FEATURES
|
Hot dip galvanizing
12 gauge steel
14 gauge steel
Rigid polystyrene insulation
Stainless steel construction
|
Control mounting plate
Separate electronics compartments
Integrated PV module mounts
Carrrying handles
Active heating/cooling equipment
|
2x4 BB8
|
SS530
|
4KS25PS |
6EHG31PS |
6CS25PS |
29x36x24
DxWxH
|
35x50x31
DxWxH
|
40x46x19
DxWxH
|
49x52x24
DxWxH
|
70
|
106 |
101 |
143 |
| 8EHG31PS |
8CS17PS |
8CS25PS |
|
50x59x19
DxWxH
|
40x61x24
DxWxH
|
52x61x24
DxWxH
|
|
| 142 |
139 |
168 |
|
|
|
|
