Aquatec’s 550 pressure pumps Cat. No. 5503-AEE-B Weight 8 lbs

These Aquatec booster pumps provide “town pressure” for remote home water supplies where 12-volt or 24-volt power is available. They have a longer life and greater flow rate than other diaphragm booster pumps and they use less than half the energy consumed by an AC jet pump running on an inverter. The 120-volt version can be used on remote power systems with inverters. Aquatec’s 550 pressure pumps delivers powerful flow rates at pressures up to 60 PSI. Their patented 5-chamber diaphragm and piston design allows these pumps to operate at very low noise levels and with minimal pulsations. These pumps are designed for intermittent duty, though most models can be run continuously for hours at a time. They are commonly used either to pressurize water from an atmospheric tank, to deliver purified water to a specific point of use, or simply to increase pressure when required. The built-in pressure switch is set for 60 psi off and 40 psi on. The pumps come with straight threaded male half-inch fittings that snap into the quick disconnect ports. The optional strainer is highly recommended to keep debris out of the pump, insuring long diaphragm life. All Aquatec 550 Pressure Pumps weigh 8 pounds each. Aquatec model Voltage Max. gpm Pressure (psi) Current draw (amps) Item code   5503-AEE-B636 12 VDC 4.10 30 11.0 075-04805 3.80 40 13.0 3.55 50 14.6   5503-AEE-B736 24 VDC 4.10 30 5.5 075-04809 3.80 40 6.5 3.55 50 7.3   5503-AEE-B656 120 VAC 4.10 30 1.42 075-04813 3.80 40 1.60 3.55 50 1.80 Strainer High flow 50 mesh in-line strainer 075-04821 Model: 075-04805, 12 Volt : $112.00 075-04809, 24 Volt : $122.00 075-04813, 120 volt AC : $144.00 Option: No Strainer 075-04821, Strainer : $20.00