|Attic Fan SunRise 1650 Solar Powered Ventilation|
Cat. No. SRS-1650
Weight 30 lbs
The SunRise™ Solar-Powered Gable Vent
is designed to mount behind existing louvers on the inside of the attic.
If no louver exists, one must be installed. Louvered vent should be mounted
in the center of the upper portion of the gable wall as high as possible.
There is some loss in fan output because louvers block some of the air flow.
Metal louvers have more open area than wood louvers and usually allow more
When installing the SunRise Gable Vent behind louvers, you should seal
off or box in any louver area not covered by the ventilator housing to prevent
air leakage and recirculation. Allow at least one square foot of air intake
area for every 300CFM of ventilator capacity. Air intake should come from
the eaves (soffit), or a louver mounted on the opposite gable end of attic.
Fan housing: 24”x24” ABS plastic
Brackets: Stainless steel
Fan blade: 12” round aluminum
Solar panel: 23”x19” with frame
Wire: 15” with all connectors
- Effective for attics up to 1200 Square Feet
1050 - Effective for attics
up to 1600 Square Feet
1250 - Effective
for attics up to 1800 Square Feet
1650- Effective for
attics up to 2400 Square Feet
Mount: installation sheet