Chest-Style Battery Enclosures for 10 Surrette Batteries Cat. No. DPW-BB-10SB Weight 100 lbs

Non-insulated Chest-Style Enclosures Desiend for 10 Surrette Batteries Chest-Style enclosures are manufactured from 1/8” aluminum and are powder coated with a bright white polyester prouder coat finish. All enclosures include a reinforced top edge. Many enclosures are listed for Concorde, Deka (MK), and Surrette batteries but we can build them to virtually any size. The boxes have a stainless steel padlock hasp. Please feel free to contact us for a quotation for a size or enclosure not listed. DESIGN Keeping with our reputation for providing tough products our battery enclosure line is no exception. All POWER-FAB battery enclosures manufactured by Direct Power and Water Corporation are built to high standards to provide a rugged, high quality product. The standard chest enclosures are manufactured for Deka, Concorde, and Surrette batteries in addition to the generic Groups 27/30, 4D, 8D, L16, and “golf-cart” type batteries. CONSTRUCTION Standard enclosures are manufactured with .125” 5052-H32 aluminum. All die marks and welds are sanded smooth. and finished with a reflective bright white polyester powder coat. This finish provides a highly reflective surface to minimize internal heat gain. All enclosures are provided with integrated louvers located low on one side and high on the opposite side to promote convective air flow through the enclosure to reduce internal temperatures and remove gasses. Filters are located over the louvers to keep out dust and insects. The filters are removable for cleaning or replacement. NEMA STANDARDS All standard enclosures are built to meet NEMA 3R specifications. Enclosures are available in NEMA 4 and NEMA 4X for certain situations. WARRANTY All battery/equipment enclosures are provided with a limited five year warranty. STANDARD FEATURES • .125” 5052-H32 aluminum • White polyester powder coat finish • NEMA 3R design • Ground Skids • Stainless steel padlock hasp • Continuous stainless steel hinge • All welds ground smooth • Screened/ventilation louvers OPTIONAL FEATURES • Hot dip galvanizing • 12 gauge steel • 14 gauge steel • Rigid polystyrene insulation • Stainless steel construction • Control mounting plate • Separate electronics compartments • Integrated PV module mounts • Carrrying handles • Active heating/cooling equipment 2x5 SS530 4CS17PS 4KS25PS 6EHG31PS 29x45x24 DxWxH 35x50x24 DxWxH 35x50x31 DxWxH 46x50x19 DxWxH 81 108 123 118 6CS25PS 8EHG31PS 8CS17PS 8CS25PS 49x65x24 DxWxH 50x59x19 DxWxH 50x61x24 DxWxH 61x65x24 DxWxH 168 142 162 45 Model: BB10-SS530 : $1,870.00 BB10-4CS17PS : $2,470.00 BB10-4KS25PS : $2,470.00 BB10-6EHG31PS : $2,420.00 BB10-6CS25PS : $3,220.00 BB10-8EHG331PS : $3,125.00 BB10-8CS17PS : $3,125.00 BB10-8CS25PS : $3,720.00