- Automatically switches from power cord to generator
- Heavy
duty contactor assembly specifically designed for rigorous use, will
handle 50 amp power cord and up to 12kw generator
- Transfers
both hot and neutral legs simultaneously
- Economical
and reliable time delay switches automatically from shoreline to
generator power
- Capable
of monitoring for low generator voltage
- Built-in
time delay allows generator to get up to speed
- Quick
and easy installation
- Designed
for oem and aftermarket applications
The
ES50M-65N is intended for use as an electrical transfer switch to
automatically switch multiple sources (from one to another), i.e.
switching from shoreline to generator power. It is primarily designed
for installation in conjunction with a generator having a rated output
no larger than 12KW and an external power cord having a rated output no
larger than 2 pole, 240VAC, 50A, 1PH, 60HZ.
CONTACTORS:
3 Pole N.O. 240 VAC 50Amps/Pole
PHYSICAL SIZE: 8 1/2" x 8 1/2" x 4 1/2"
COIL: 110VAC (60Hz, Inrush current - 77 Watts, Sealed
- 4.0 Watts)
KNOCKOUTS: Assorted
TIME DELAY: Custom time delay, 30 seconds nominal.
Includes generator low voltage monitoring
WEIGHT: 8.5 lbs
CAUTIONS: :
Install vertically or horizontally in a dry, accessible area. Consult
factory before drilling metal case. Keep covered except during wiring
as contactors are sensitive to dust and debris. When hi-potting coach,
disconnect es50m-65n or hi-pot on load side of switch. This unit has
been hi-potted to UL standards at the factory.
WARRANTY:
Elkhart Supply Corporation warrants that this product shall be free
from defects in material and workmanship for one year (twelve months)
from date of purchase or eighteen months after date of manufacture,
whichever is less. If, after our inspection, a defect is revealed, the
unit will be repaired and returned, at our discretion. We will accept
up to 1/2 hour (30 minutes) labor for the unit to be changed out or
$18.00, whichever is less. This warranty shall not apply to any product
that shows evidence of neglect, misuse, improper installation, or that
has been repaired or altered by any other party other than this
company. Proof of purchase may be required.
