SolarTech 90 watt Cat. No. SPM090P Weight 20 lbs

The SPM090P-TS-N, SPM090P-TS-F and SPM090P-MF are a 12V impact-resistant solar module. Wire it in series for higher voltages. It is an excellent choice for all smaller off-grid solar power applications. It features polycrystalline solar cells that produce higher output per module than others in the same class. In a system, the SPM090P-  is typically used to charge 24 volt or 48 Volt batteries when wired into one, two solar modules. Features 90W / 12V/ C1D2 rated Anodized aluminum tubular frame for durability Impact-resistant glass allows max light transmission IEC61215, UL 1703, ETL C1D2 Groups C and D certifications Junction Box with (4) ½” conduit knockouts and (2) installed cord grips SPM090P-TS-F 90 watt / 12V / C1D2 rated Module Dimensions (in) Length: 39.9, Width: 26.3, Depth: 1.38 Module Weight (lbs) 19.8lb Maximum power voltage(Vpm) 18.3 volts SPM090P-MF* 90 watt / 12V / C1D2 rated Module Dimensions (in) Length: 47.2, Width: 20.7, Depth: 1.38 Module Weight (lbs) 17.6lb Maximum power voltage(Vpm) 18.3 volts SPM090P-TS-N 90W / 12V / not C1D2 rated Module Dimensions (in) Length: 39.9, Width: 26.3, Depth: 1.38 Module Weight (lbs) 19.8lb Maximum power voltage(Vpm) 8.3 volts SPC090P 90 watt / 12V / not C1D2 rated Module Dimensions (in) Length: 37.2in  Width: 26.6in Depth: 1.38 Module Weight (lbs) 18 lb Maximum power voltage(Vpm) 18.3 volts SPM090P-WP-F 90 watt / 24V / C1D2 rated Module Dimensions (in) Length: 39.9, Width: 26.3, Depth: 1.38 Module Weight (lbs) 19.8 lb Maximum power voltage(Vpm) 35.0 volts *This module is not for use within hazardous gas C1D2 locations or in applications greater than 1000 Watts. Model: SPM090P-WP-F : $281.45 SPM090P-TS-N : $295.75 SPC090P : $160.00 SPM090P-TS-F : $318.75 SPM090P-MF : $318.75