|
Home: EcoVantage Catalog: Electronics: Surge Protectors:
Citel Surge Protection Products
Cat. No. CIT- 53.42xx
Weight 1 lbs | |
DS210DC Off-Grid Surge Arrestor
Series is designed to protect 12V, 24V, 48V and 150V DC power lines for
an off-grid PV system. The surge protectors protect the charge controller
and other
system electronics. Automatically reset after each lightning surge
or electrical transient.
DS50PV Grid-Tie Surge Arrestor
Is designed to protect the solar panel array at the solar PV array combiner
box for a utility-interactive PV system. Is designed to withstand
40kA (8/20us) induced transient surges and is designed with replaceable modules.
Use DS50PV-500 for systems with inverters that have an upper limit of
500 volts.
Use DS50PV-800 for inverts that allow arrays over 500VDC. For use
with grounded arrays.
DS60PV Grid-Tie Surge Arrestor
Are Type 1 heavy duty surge protectors, recommended when a direct lightning
strike is possible on the installation. They are available in 500- and
1000-VDC operating voltages. The use of Type 1 surge protector is recommended
at both ends of the DC power supply line (solar panel side and inverter/
converter side). Is made
with a monobloc enclosure and mounts on DIN rail.
Citel model
|
Nominal
volts
|
Maximun
DC volts
|
Discharge
current
|
Width
in (mm)
|
DS210-12DC
|
12
|
15
|
1 kA
|
0.7 (18)
|
DS210-24DC
|
24
|
30
|
1 kA
|
0.7 (18)
|
DS210-48DC
|
48
|
56
|
1 kA
|
0.7 (18)
|
DS210-95DC
|
95
|
100
|
2 kA
|
0.7 (18)
|
DS210-130DC
|
130
|
150
|
2 kA
|
0.7 (18)
|
DS50PV-500
|
500
|
530
|
20 kA
|
1.4 (36)
|
DS50PV-1000
|
800
|
840
|
20 kA
|
1.9 (48)
|
| DS60PV-500 |
500
|
550
|
40 kA
|
2.8 (72)
|
DS60PV-1000
|
1000
|
1000
|
40 kA
|
2.8 (72)
|
|
|
|
