Exeltech XP1100 and XP2000 Sine Wave Inverter Cat. No. ELX-XP1100 Weight 40 lbs

Made in America, EXELTECH XP SERIES INVERTERS are the most affordable, reliable, lightweight and best regulated, true sine wave inverters available. The XP SERIES inverter will operate any AC load anywhere. Ultra lightweight, yet rugged enough for the most extreme mobile environments, and are UL listed to 1950 for telecom applications. The XP SERIES is available in 100Vac, 120Vac, or 230Vac in 50Hz, 60Hz or 400Hz and suited for multiple applications, worldwide. - True Sine Wave - 1100  Watts - 12 Vdc to 108 Vdc Input - Rack Mount Optional - Remote Switching - 21.5 Years MTBF DC INPUTS (12 VDC - 108 VDC): a 6' non-terminated, two conductor power cord is provided. Insulation on the negative (-)conductor is black and insulation on the positive (+) conductor is red. AC OUTPUTS:one NEMA-15 outlet (standard wall receptacle) is located on the Front Panel. LOW BATT / THERM BUZZER ; produces an audible alarm if DC input voltage falls to a level within 2% to 4% of the low limit of inverter, or, if there is an over temperature condition. OVER VOLTAGE PROTECTION: If input voltage to the inverter exceeds set limits, the inverter will immediately and without warning shut off. When input voltage returns to normal range, the inverter will immediately restart. Since high over voltages tend to have very fast edges, the inverter must shut down quickly to protect itself. This kind of fault usually occurs if the battery is suddenly disconnected from the system and the battery charger continues to supply current. UNDER VOLTAGE PROTECTION: When battery voltage falls to within 2% to 4% of low line voltage, the LOW BATT / THERM buzzer will sound. If the condition continues without reducing load to the inverter or adding charge to the battery, the inverter will shut off. When voltage rises to approximately 95% of nominal battery voltage, the inverter will turn back on and the alarm condition will clear. The inverter can be manually reset by cycling the on/off switch. This will reset the protection circuitry and turn the inverter on at any voltage above minimum voltage. Output Power Continuous Power Surge Power No Load Power Output Voltage Output Current Weight LBS. 1100 Watt** 2200 Watts 20 Watts* 100 +/- 6% 11.0 10 1100 Watt** 2200 Watts 20 Watts* 120 +/- 6% 9.5 10 1100 Watt** 2200 Watts 20 Watts* 230 +/- 6% 4.8 10 Input Power Model Voltage Minimum (Typical)** System (Typical) Maximum (Typical)** Typical Efficiency @ Full Power Peak Efficiency @ 1/3 Power 12Vdc 10.4/10.6Vdc* 13.8Vdc 16.5Vdc 85% 87% 24Vdc 19/21Vdc* 27.6Vdc 33Vdc 87% 89% 32Vdc 26.5/28Vdc* 36.8Vdc 44Vdc 88% 90% 48Vdc 41.5/42.1Vdc* 55.2Vdc 62Vdc 87% 89% 66Vdc 57.5/58.5Vdc* 75.9Vdc 91.1Vdc 88% 90% 108Vdc 94/95Vdc* 125Vdc 149Vdc 87% 90% *Indicates typical cut-off voltage/warning buzzer voltage ** +/- 3% Model: 100 Volt AC output : $19.00 120 Volt AC output 230 Volt AC output : $490.00 Option: No Mounting Face 19 in Rack Mount Plate : $27.00 23 in Rack Mount Plate : $27.00 Option 2: No GFI Receptacl GFI Receptacl : $32.00 Option 3: No Coating Conforaml Coating : $75.00 Option 4: 50Hz 60Hz 400Hz : $45.00 Option 5: No Transfer Switch 50 MS Transfer Switch (X20) : $34.00 Voltage: 12 Volts : $748.00 24 Volts : $816.00 48 Volts : $975.00 120 Volts : $975.00 Wattage: 1100 watts 2000 watts : $1,002.00