Mobile Data Power System MDP-25.0 Cat. No. 425-5750-0 Weight 10 lbs

$884.50

Under normal operating conditions, the electronics operate from primary battery voltage of the vehicle or vessel. This same voltage powers the internal battery charger that maintains the MDP internal battery in a fully charged state. The charger circuit operates on an input range of 9.5-14 volts, so even if the primary battery voltage decays the MDP internal battery will receive proper voltage and be maintained at full charge. The internal charger has a rapid recovery, three step output and temperature compensation sensor that varies the charge voltage based on ambient temperature to prolong battery life. DESCRIPTION Mobile Data Power System Protects mobile computers against system crash, lengthy reboot sequences, and loss of data Internal battery provides supplemental 12 volts to mobile data devices when low vehicle battery is sensed: 5A for 60 minutes, 10A for 20 min., and 25A for 8 min. Contains time out circuit to preserve battery Built in Multi-Stage filter provides clean power required by mobile electronics Provides low output warning signals to mobile computers (such as Motorola® MW 800 series work stations) Internal 3 stage, temperature compensated charger maintains internal 9 A/H back-up battery in fully charge stand-by state Optional Timed Load Disconnect 3 year warranty Input 12 Vdc, 28.5 Amps Max Output 12 Vdc Filtered Warranty 3 Years Weight 10 Lbs Operating Temperature 0 To 50 C Back-Up Volts 12.0 Vdc Nominal, From 7 A/H Internal Battery Back-Up Amps 5 Amps For 60 Minutes, 10 Amps For 20 Minutes, 25 Amps For 6 Minutes Battery Sealed Lead-Acid, Rechargable 7 A/H, 5 Years Typical Life Internal Charger 2 Amps Max, 3 Stage, Temperature Compensated Filtering Audio Through 200 MHz Voltage Spike Potection 100 Joules, 4,000 Amps Max Site Information: Head (Ft) Flow (CFM) Pipe Size (in)