The
Intellitec Single Disconnect Battery Control Center ( BCC ) is the
ideal solution for the up fitter or OEM special vehicle
manufacturer.The single disconnect BCC offers reliable battery control
and fusing in a compact and rugged easy to install solution. Single
disconnect BCC includes a remote disconnect for the auxiliary battery,
a bi directional isolator, boost start function and 10 fuses to supply
protected power from the auxiliary battery and ignition switched
sources. One of these outputs is hot only when the ignition is off.
This can be used as a lock out for various functions such as slide
outs, PC monitors, TV`s etc.
The bi directional isolator relay delay ( BIRD) function charges both
batteries when either one is being charged. When the vehicle is being
driven, both batteries will be charged from the engines alternator. If
the vehicle is plugged into shore power, both batteries will be charged
from the converter. If neither battery is being charged, the batteries
are fully isolated. The controller also senses heavy loads on either
battery to prevent the wrong battery from being inadvertently
discharged. The controller operates by sensing the voltages on both
batteries. When either battery is being charged, the controller will
close the isolator solenoid, connecting the two batteries together and
charging them both.
Specifications:
| Part Number: | 00-01087-000 |
| Standby Current: | Less than 1 milliamp |
| Ambient Temperature Range: | -40C to +85C |
Normal Input Voltage Range:
| 10 to 18 volts |
| Short Term Over Voltage Protection: | +26 volts |
Reverse Voltage Protection:
| - 300 volts |
Positive Voltage Spike Protection:
| +150 volts |
Operating Environment:
| Under hood, out of direct weather |
Fuses:
| Fuse No. | Function | Fuse Size | Source |
F1
| Reverse Ign
| 15 Amp
| Main Bat |
F2
| Ign Sw
| 7.5 Amp
| Main Bat |
F3
| Ign Sw 1 | 5 Amp
| Main Bat |
F4
| Ign Sw
| 10 Amp
| Main Bat |
F5
| Aux Start Sw
| 5 Amp
| BIRD |
F6
| Spare
| 10 Amp
| Disconnected Aux Bat |
F7
| Spare
| 15 Amp
| Disconnected Aux Bat |
F8
| Spare
| 15 Amp
| Disconnected Aux Bat |
F9
| Spare
| 15 Amp | Disconnected Aux Bat |
| F10 | Step Power
| 25 Amp
| Disconnected Aux Bat |
Note: The sum of the
continuous current
through F2+F3+F4 must
not exceed 30 Amps
Associated documents for this product
Service Manual PDF Click to download »
