The unit is the only 20 watt
product in the business, will move 1275
cfm and will handle up to a 1600 square foot attic footprint, and
we’ll keep that attic at or close to ambient all day long!
SDF-20SF (Self Flashed Base) is
designed for sloped low profile roof installations such as composite
shingle. Minimum slope should be greater than 2:12 and maximum
slope
should be less than 6:12. (Use a curb mount base if the slope is
less
or greater than these slope ratios.)
The self flashed base is designed to
slide under an existing roof. The based is attached to the roof
decking with either roofing nails or screws. Care should be taken
to
waterproof the based to the roof decking and roofing materials.
Use
the highest quality roofing silicon. Always determine the amount
of
run off water at the head of the base. If the location of the fan
is
an area where there may be an excessive amount of run-off water, then
use a curb-mount
SDF-20TM Mounts on existing turbon Vents just four screws and it is
mounted
SDF-20CM (Curb Mount Base) is
designed for curb mount installations. Generally a 2"x4" or 2"x6"
curb
box is built and flashing is attached to the perimeter of the curb
box. Curb mount installations should be used on flat or very low
slope
roofs. Curb mount installations are also recommended for higher
profile roofs, such as ceramic or concrete tile, certain metal roofs,
thick wood shake, etc. The flashing materials are generally
metal, but
can be made of certain types of roofing materials. Care should be
taken to isolate dissimilar metals and to properly waterproof the curb
box to the roof.
On top of the curb box, attach
weather stripping or two sided foam tape. Place the SDF-20CM base
on
top of the curb box and fasten at least two screws on each side into
the curb box.
Specifications
SDF-20
Capacity:
1275
CFM
Solar
Panels:
Sun Wise Moncrystalline
|
Fan Blade:
12" diameter, one-piece aluminum 5
blade with optimum pitch (coated with black enamel paint).
Motor:
Whisper-quiet
direct current, variable voltage 1-36 VDC sealed ball bearing, hardened
stainless steel shaft, zinc plated steel motor housing, dynamically
balance armature skewed for low clogging.
Brackets:
16 AWG stainless steel.
Fasteners:
Stainless Steel Bolts, nuts, and self
taping screws. Stainless steel and aluminum pop rivets.
Screen: 1/8" heavy gauge
stainless steel to provide maximum protection from insects, but will
not impede airflow.
|
|
To view or download self flashed installation
instructions click HERE.
5 Year Limited Warranty
The Cycolon is now recognized as a "GreenSpec" listed product via
BuildingGreen.com. The significance of this is that it qualifies it for
LEED credits in commercial construction projects, and thats a big deal
with commercial builders vying for energy tax credits
|
EcoVantage Mobile Catalog
