|Intellitec Battery Guard Kit|
Cat. No. MT00-00317-000
INTELLITEC'S BATTERY GUARD system
batteries"" by disconnecting the battery before it is completely
drained and cannot start the vehicle. It is designed to be used in
vehicles with 12 volt electrical systems. The system consists of an
Intellitec Battery Disconnect Relay, the Battery Guard Controller, and
the dash mounted Battery Guard Reset Switch with LED indicator.
The heart of the system is the unique Battery Disconnect Relay (US
Patented #4,628,289) that has been used by the RV industry for over
seven years. This rugged, latching relay is capable of carrying heavy
vehicle currents even though it requires no power to maintain its open
or closed positions.
Includes relay, wiring, and hardware needed to install.
- Low Voltage Sensing - Battery Guard senses the
battery voltage to determine condition of charge. When the voltage is
less than 12.0 volts for four minutes, the battery will be disconnected.
- Dash Mount Reset Switch - When the battery has been
disconnected, it can be reconnected by pressing the Battery Guard Reset
- Disconnect Indicator - The Switch LED will blink
to indicate that the battery has been disconnected.
- Automatic Re-connect - When the voltage rises
above 13.0 volts, as with a ""jump start"" or connection of a charger,
the battery will automatically be re-connected.
- Ignition Override - When the ignition switch
is turned on, the unit will not disconnect the battery, regardless of
the voltage level.
- System Test Switch - There is a ""Test""
switch on the Controller that allows testing of the completed
- Disconnect Bypass - A terminal on the
Controller provides constant battery power to the radio or phone
memory, or as a solar panel connection.
|New Installations Requires 1 of the
|Continuous Carry Current
||Less than 1 Milliamp
Warranty Terms: 1 year